2) Select
Setup
>
Other Settings
>
Exchange Channel List
and press
OK
to access.
3) Follow the on-screen instructions.
– During the operation, remove USB devices other than the USB Flash
Memory used for this function.
Settings > Setup > Other Settings
■
Skip unwanted Analogue channels
You can hide (skip) unwanted channels. The hidden channels cannot be
displayed except in this function.
1. Select
Channel List
and press
OK
to access.
2. Select a channel.
3. Press
OK
to set
Reveal
/
Hide
(skip).
:
Reveal
:
Hide
(skip)
●
To reveal all channels (if available)
(yellow)
■
Edit Analogue Channels
●
To swap / move the channel position (if available)
1) Press
(green) to edit.
2) Set the new position with
Cursor buttons
and press
(green) to
store.
●
To retune each channel (
Manual Tuning
)
(red)
●
To rename the channel name
1) Press
(blue) to edit.
2) Enter characters (maximum 5 characters) with
Cursor buttons
or
Numeric buttons
, and press
OK
to set.
3) Press
BACK/RETURN
to store.
- 110 -
Summary of Contents for TX-75FXW785
