Signal Condition
Checks the signal condition.
Watching > Tuning and editing channels > Signal Condition
Antenna System
Sets the antenna system to use plural LNBs for receiving several satellites.
Watching > Tuning and editing channels > Auto Setup
LNB Configuration
Selects the satellite for each LNB.
Watching > Tuning and editing channels > Auto Setup
Attenuator
Automatically reduces the DVB-C signal to avoid the interference.
Watching > Tuning and editing channels > Other settings
Add TV Signal
Adds the TV mode.
Watching > Tuning and editing channels > Other settings
= Note =
●
The settings in
Tuning Menu
are applicable only for the selected TV mode.
The menu name varies depending on the TV mode. (
DVB-S Tuning Menu
/
DVB-C Tuning Menu
/
DVB-T Tuning Menu
/
DVB-via-IP Tuning Menu
/
Analogue Tuning Menu
)
- 318 -
Summary of Contents for TX-75FXW785
