background image

Teletext mode

Teletext services are the text information provided by the broadcaster.

 

The features may vary depending on the broadcaster.

1.  Display the menu with 

MENU

.

2. Select 

Setup

 > 

Display Settings

 > 

Teletext

 and press 

OK

 to access.

3. Select 

TOP

 (

FLOF

) / 

List

 and press 

OK

 to set.

 

TOP mode (For TOP text broadcasting)

TOP is a particular improvement of the standard teletext service that results in 

an easier search and effective guide.

 

Fast overview of the teletext information available

 

Easy to use step-by-step selection of the topical subject

 

Page status information on the bottom of the screen

 

Available page up / down

 (red) / 

 (green)

 

To select among subject blocks

 (blue)

 

To select next subject within the subject block

 (yellow)

(After the last subject, it moves to the next subject block.)

 

FLOF (FASTEXT) mode (For FLOF (FASTEXT) broadcasting)

In FLOF mode, four differently coloured subjects are situated on the bottom of 

the screen.
To access more information about one of these subjects, press the 

appropriate coloured button.
This facility enables fast access to information on the subjects shown.

 

List mode

In List mode, four differently coloured page numbers are situated on the 

bottom of the screen. Each of these numbers can be changed and stored in 

the TV’s memory.

 Watching > Teletext > Viewing Teletext

- 106 -

Summary of Contents for TX-75FXW785























































































































































































































































































































































Reviews: