■
Signal Supported Recording
Signal Supported Recording
is
Timer Programming
which is controlled by
information from the TV Guide; if programme start and end times are changed
by the broadcaster, the timer event will follow the change. Note that
Signal
Supported Recording
only works reliably if correct information is received
from broadcasters.
●
The availability of this function depends on the country and TV mode you
select.
●
is displayed on the timer event if
Signal Supported Recording
is set.
= Note =
●
If you edit the start time or end time of a signal supported recording event
by more than 10 minutes, it will no longer follow the broadcaster’s changes
to the start or end time. The start and end times will become fixed.
- 103 -
Summary of Contents for TX-75FXW785
