Basic Connection
10
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
Rear of the TV
■
Clamper
Attach the clamper
Bundle the cables
To remove from the TV: To loosen:
Mains lead
Aerial
RF cable
AC 220 - 240 V,
50 / 60 Hz
Fully wired HDMI
compliant cable
RF adaptor
(supplied)
Set top box
Satellite dish
hole
Insert the
clamper in a
hole
hooks
Set the
tip in the
hooks
Keep
pushing
both side
snaps
snaps
knob
Keep
pushing the
knob
Note
•
Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
•
Do not place the RF cable under the TV.
•
To obtain optimum quality picture and sound, an aerial, the correct cable (75
Ω
coaxial), and the
correct terminating plug are required.
•
If a communal aerial system is used, you may require the correct connection cable and plug between
the wall aerial socket and the TV.
•
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial
system for your particular area and the accessories required.
•
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
•
VIERA Link connection
(p. 79)
•
Other equipment connection
(p. 85 - 86, 95)
•
Read the manual of the external equipment, too.
