Accessories / Options
8
Adjust the panel to your desired angle
(View from above)
∗
15°
(TH-P42GT30A)
∗
10°
(
TH-P46GT30A
TH-P50GT30A
)
•
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full
rotation range.
•
Do not place any objects or hands within the full rotation range.
Preventing the TV from falling over
This TV could fall over if it is pushed, pulled or knocked down.
We therefore recommend the TV is secured to the furniture as illustrated.
•
This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee
protection in all cases.
Fall-prevention parts
Securing to a furniture
Fix pedestal and furniture together with band.
Band
Screw
Wood screw
Screw
Band
Wood screw
•
This image is for illustrative purposes only.
Securing the TV
Insert the pole into the TV, and then fasten securely
with the assembly screws .
•
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
B
Bottom view
Rear side
Hole for
pedestal installation
Pole
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking
the TV.
1
Remove the assembly screws from the TV.
2
Pull out the pedestal from the TV.
3
Remove the assembly screw from the cover.
4
Pull out the cover.
5
Remove the assembly screws from the pole.
