Panasonic SF4-AH Series, Instruction Manual

Page: 43 / 80

<Mounting of U-shaped side mounting intermediate supporting bracket and L-shaped
intermediate supporting bracket>
1. Place the retaining plate on the U-shaped side mounting supporting bracket and
temporarily tighten them with the pan head screw [M3 (length 10mm)].
2. Temporarily tighten the L-shaped intermediate supporting bracket to the U-shaped side
mounting supporting bracket with the hexagon-socket-head bolt with washer [M4 (length
10mm)] for position adjustment.
3. Clamp the sensor main body with the U-shaped side mounting supporting bracket and
completely tighten the pan head screw that secures the retaining plate. (Tightening
torque: 0.4N·m or less)
After beam-axis alignment, completely tighten the bolt that secures the U-shaped side
mounting supporting bracket and the L-shaped intermediate supporting bracket.
(Tightening torque: 1.8N·m or less)
<Reference>
For mounting the receiver, the U-shaped side mounting intermediate supporting bracket is mounted
upside down.
© Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SF4A No.0038-55V
- 43 -