RQTV0311
29
Reset
(factory settings)
The operation
settings for the unit
will be initialised to
the settings made at
the time of shipment.
All the settings are reset when you select
“YES”
and the input selector automatically
switches to
“BD/DVD”
.
If you select
“NO”
, you will return to step 2. To exit setup mode, press [BALANCE/
RETURN] a few times to display
“EXIT”
, and then press [OK].
•
•
TV, DVD, AUX1, AUX2
AUTO
: The unit automatically detects whether input is digital
or analogue. (HDMI takes priority when input is digital.);
ANLG
:
Analogue input fixed;
DIG
: Digital input fixed;
PCM:
PCM (from
CDs) digital input fixed;
DTS
: DTS digital input fixed
Setting input
signals
With
“AUTO”
setting,
you can playback
most of the sources.
However, if you
cannot playback
PCM or DTS sources
properly, fix the
setting accordingly.
Set to
“AUTO”
again
if noise occurs.
Repeat steps 3 and 4 to change setting
When using 2 or more Panasonic products (stereo system, amplifier, etc.)
Other Panasonic products may also be operated by this unit’s remote control. If this occurs, change this unit’s remote
control code to
“REMOTE 2”
. Do the following to set the remote control code and this unit’s remote control mode to
the same one.
2
1
Press
to select
“INPUT
MODE”
.
3
Press
to select setting.
5
4
Press
to select input signal.
2
1
Press
to select
“RESET”
.
3
Press
to select
“YES”
.
YES, NO
1, 2
2.
1.
Press
to select
“REMOTE”
.
3.
Press
to select
“2”
.
Press and hold
for about 2 seconds.
4.
While pressing
, press and hold
about 2 seconds.
To restore the code to
“1”
In step 3, select
“1”
.
In step 4, while pressing [OK], press and hold [TV] for about 2 seconds.
Factory setting:
AUTO
Factory setting:
1
Setting the amplifier’s mode (by remote control)
Remote control setting
After step 4,
press [BALANCE/RETURN] a few times to display
“EXIT”
, and then press [OK] to exit from setup mode.
•
Press and hold
for about 2 seconds.
Press
to confirm.
Press
to confirm.
Press
to confirm.
Press
a few times to select
“EXIT”
.
Return to previous menu/cancel.
•
Press
Press and hold
for about 2 seconds.
Press
to confirm.
Select
“EXIT”
and
confirm to finish the
setup mode.
•
Press
to confirm.
REAL C.,
BASS,
TREBLE, SLEEP, HDMI,
TV DELAY, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
REAL C.,
BASS,
TREBLE, SLEEP, HDMI,
TV DELAY, DRCOMP, ATTENUATOR, REMOTE,
INPUT MODE, RESET, EXIT
Press
to confirm.
Only appears when audio adjustment can be made.
REAL C.,
BASS,
TREBLE, SLEEP, HDMI,
TV DELAY, DRCOMP, ATTENUATOR, REMOTE,
INPUT MODE, RESET, EXIT
Press
to confirm.
Select
“EXIT”
and confirm
to finish the
setup mode.
•
Press
to confirm.
Play
Functions and settings
Functions and settings
Select
“EXIT”
and
confirm to finish the
setup mode.
•
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 29
2/14/2008 11:57:03 AM
