background image

RQTV0311

32

Analogue

Audio signals produced from L/R audio output 
terminals of general equipment is called analogue 
audio.

Surround signal

Audio signal made up of front speakers, center 
speaker and surround speakers. For this unit, 
surround signal is automatically played by Dolby 
Virtual Speaker.

Sampling frequency

Sampling is the process of converting the heights of 
sound wave (analogue signal) samples taken at set 
periods into digits (digital encoding).
Sampling frequency is the number of samples 
taken per second, so larger numbers mean faithful 
reproduction of the original sound.

HDMI Standby mode

When this unit and TV (VIERA) and DIGA DVD 
recorder are connected with HDMI cables, image/ 
audio from DIGA can still be transmitted to TV even 
though the unit is turned off.
This is useful when you want to enjoy late night 
viewing only with the television’s speakers.

Dynamic range

Dynamic range is the difference between the lowest 
level of sound that can be heard above the noise of 
the equipment and the highest level of sound before 
distortion occurs.

Decoder, Decode

Decoder is the device to enable us to hear audio 
data that is encoded on DVD, etc., as a normal 
audio signal. This process is called decoding.

Digital

Blu-ray Disc players, DVD recorders, DVD players, 
and CD players are usually equipped with digital 
output terminals. Connect through the digital 
terminal to enjoy digital surround systems such as 
Dolby Digital and DTS.

Dolby Surround

Dolby Surround is a four-channel analogue 
surround system, consisting of two front channels 
(left and right) (stereo), a center channel for 
dialogue (monaural), and a surround effect channel 
(monaural), producing a dynamic and rich surround 

effect. The surround channel plays a narrow range.

Optical

Using optical fibre cable for digital signal input/
output from DVD, CD, etc., provides better sound 
quality for playback or recording compared to 
analogue. Only possible with equipment that has an 
optical terminal.

CPPM (Content Protection for Prerecorded Media)

This is the copyright protection technology which 
prevents file copy of DVD audio.

Dolby Digital (DVD etc.)

Digital surround system developed by Dolby 
Laboratories.

Dolby Pro Logic 

ΙΙ

This system can process not only Dolby Surround, 
but also other 2-channel sources to produce a 5.1-
channel sound for a more realistic sound field. It is 
also possible to enhance old movies recorded in 
stereo with this dynamic 5.1-channel sound. This 
unit uses Dolby Pro Logic 

ΙΙ

 to add surround effects 

to stereo sources such as video cassettes and CDs.

Dolby Virtual Speaker

This system allows you to enjoy a surround effect with 
two front speakers, a center speaker, and a subwoofer. 
This is not merely a “virtual surround” effect, but rather 
uses the optimal speaker arrangements and listening 
positions for 5.1-channel sound.

DTS (Digital Theater Systems)

Digital surround system developed by DTS, Inc. 
This surround system is used in many movie 
theaters around the world. There is good separation 
between the channels, so realistic sound effects are 
possible.

HDMI (High Definition Multimedia Interface)

HDMI is a next-generation digital interface for 
consumer electronic products. Unlike conventional 
connections, it transmits uncompressed digital 
video and audio signals on a single cable. This 
unit supports high-definition video output (720p, 
1080i) from the HDMI AV OUT terminal. To enjoy 
high-definition video, a high-definition compatible 
television is required.

PCM signal (CD, DVD audio, etc.)

Analogue sounds are converted to a digital 
bitstream signal. This is the type of digital audio 
signal used for CD, DVD audio, etc.

5.1 Channel surround

Monaural and stereo use one channel and two 
channels respectively to reproduce sound, but 
5.1-channel surround uses 5 speakers and a 
low frequency effect channel. The 5 channels 
are: 1 center speaker, 2 front speakers, and 2 
surround speakers at the side of or to the rear of 
the sitting position. Sound output of the subwoofer 
is much narrower than the other speakers, and so 
is considered as 0.1. This is called 5.1-channel 
surround when played through all 5.1 channels, and 
with this unit you can achieve a similar effect with 
Dolby Virtual Speaker.

Glossary

Reference

Glossary

SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd   32

2/14/2008   11:57:07 AM

Summary of Contents for SC-HTR200





































Reviews: