RQTV0311
12
Preparation
Installing a Blu-ray Disc player/DVD recorder or other equipment on the shelf
(Please also refer to the other equipment’s operating instructions.)
Installing the television (refer also to the television’s operating instructions.)
Place the television (with stand attached) in the centre of the rack.
Recommended: 42 inches or less
Installing and assembling the rack (cont.)
Use a utility knife to remove the cut-out on
the back panel of this unit after installing the
equipment.
Extend the blade of the knife between about
5 mm and 10 mm and cut with care.
Refer to pages 14 to 18 for connections with
other equipment.
When installing equipment that produces heat,
remove the cut-out to allow ventilation.
Pass the equipment’s cables through the cut-out.
•
•
•
1
2
Do not put equipment weighing more than 12 k
g
on the upper shelf or more than 20 k
g
on the lower shelf.
Image interference may occur if you put a DVD recorder, etc. on the upper shelf. Put it on the lower
shelf if this occurs.
Refer to the following table before installing equipment in the rack.
•
•
•
Attach the stand to the television.
Front view
Rear view
Cut-outs
Utility knife
Television stand
Note
Connection
Installing and assembling the rack
Dowel position
Upper
Middle
Lower
Compartment
H
Upper shelf
98
128
158
Lower shelf
103
73
43
W
730
D
400
UNIT: mm
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 12
2/14/2008 11:55:52 AM
