RQTV0311
11
Shelf assembly
A
Glass door assembly
B
Fully insert the metal dowels (included) in holes
front and back which are at the same height.
Do the same for the opposite side.
Put the shelf (included) on the metal dowels so they
fit into the prepared holes in the shelf.
Change the position of the dowels to move the
shelf up or down.
•
1
2
Insert the hinge (included) into the hole so the
screw faces into the unit.
Insert the glass door (included) into the upper
and lower hinges and screw in place to hold the
door temporarily.
The illustration shows how to assemble the left
door.
VIERA Link and other logo marks are on the
right door.
Adjust the height and gap of glass door, then
tighten the upper and lower screws with a
Phillips-head screwdriver.
Assemble the other door in the same way.
Do not over-tighten the screws.
Use a Phillips-head screwdriver that matches
the size of the screws.
•
•
•
•
•
1
2
3
Hole
Metal dowel
Hole
Hole
Hinge
Phillips-head
screwdriver
Screw
Inner side of door
Under the shelf
Shelf
Left door
Inner side of door
Lower hinge
Upper hinge
Edge
Connection
Installing and assembling the rack
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 11
2/14/2008 11:55:49 AM
