Panasonic SC-HTR200, Operating Instructions Manual

Page: 9 / 36

RQTV0311
9
Digital surround signal/Sound field (  page 23)
Remote control
Remote control preparation
Inserting the batteries
Using the remote control
Do not place an object between the signal sensor and the
remote control.
Do not place the signal sensor under direct sunlight or the
strong light of a fluorescent lamp.
Keep the transmission window and the unit’s sensor free
from dust. •
•
•
(R6/LR6, AA)
Remote control signal sensor
Press on the tab to open.
Standby/on button (

pages 19 to 21)
Input mode and remote control
mode buttons (

page 21)
For adjusting the center speaker
level (
 pages 26 and 27)
For adjusting the subwoofer level
(  pages 26 and 27)
For adjusting the volume
(
 pages 19 to 21)
Using the [DVD ONE TOUCH PLAY]
button to play a DIGA DVD recorder
(  page 24)
Muting (  page 26)
For adjusting speaker balance
(
 page 26)
For returning to the previous menu
(

pages 25 to 29)
For using “GAME (SOUND)”
(  page 26)
Test signal output (  page 19)/
Adjusting speaker output (  page 27)/
To enter setup mode
(  pages 25 to 29)
For adjusting settings
(
 pages 25 to 29)
For selecting or cancelling
Dolby Virtual Speaker and SFC mode
(  pages 22 and 23)
7 meters or less (actual
distance depends on the
angle)
Transmission window
Before use
Control guide/Remote control preparation
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Do not use rechargeable type batteries.
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with
doors and windows closed.
•
•
•
Insert so the poles (+ and -) match those in the
remote control.
Note
Do not:
mix old and new batteries.
use different types at the same time.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store in a cool, dark place.
•
•
•
•
•
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 9 2/14/2008 11:55:42 AM