Panasonic SC-HG1-C, User Manual, Page: 79 / 128

CC-LINK Network Communication
WUME-SCHG1C-4 4-45
Command Attribute Name Response/Setting parameter
HG-T
Series
0x0364 W Beam axis adjustment end
End beam axis adjustment.
Specify "0".
0x0365 to 0x036F - System reserved Do not use.
0x0370
R
Waveform read setting
(Note 3)
bit0 to bit7 : Select a waveform type.
0x00 : Reference waveform
0x10 : Waveform during beam axis adjust-
ment
0x11 : Measured waveform
bit8 : Reserved
bit9 : Status
0: Waveform information has not
been saved
(For example, immediately after
the unit starts up, operation
mode is changed, or measured
values are reset)
1: Waveform information has been
saved
bit10 to bit15: Reserved
W
bit0 to bit7 : Select a waveform type.
0x00 : Reference waveform
0x10 : Received light waveform during
beam axis adjustment
0x11 : Measured waveform
b i t 8 t o
bit15
: Reserved
Always set "0x01".
0x0371 R Waveform read data 1
Obtains four bytes of received light waveform
data (“Received light intensity 0” to “Received
light intensity 3”)
0x0372 R Waveform read data 2
Obtains four bytes of received light waveform
data (“Received light intensity 4” to “Received
light intensity 7”)
0x0373 R Waveform read data 3
Obtains four bytes of received light waveform
data (“Received light intensity 8” to “Received
light intensity 11”)
0x0374 R Waveform read data 4
Obtains four bytes of received light waveform
data (“Received light intensity 12” to “Received
light intensity 15”)
0x0375 R Waveform read data 5
Obtains four bytes of received light waveform
data (“Received light intensity 16” to “Received
light intensity 19”)
0x0376 R Waveform read data 6
Obtains four bytes of received light waveform
data (“Received light intensity 20” to “Received
light intensity 23”)
0x0377 R Waveform read data 7
Obtains four bytes of received light waveform
data (“Received light intensity 24” to “Received
light intensity 27”)
0x0378 R Waveform read data 8
Obtains four bytes of received light waveform
data (“Received light intensity 28” to “Received
light intensity 31”)
0x0379 R Waveform read data 9
Obtains four bytes of received light waveform
data (“Received light intensity 32” to “Received
light intensity 35”)
0x037A R Waveform read data 10
Obtains four bytes of received light waveform
data (“Received light intensity 36” to “Received
light intensity 39”)