Panasonic SC-HG1-C, User Manual, Page: 64 / 128

CC-LINK Network Communication
WUME-SCHG1C-4 4-30
4-6 Judgment output reading
You can get the external output and alarm output of each controller by reading RX[20] to [2E],
RX[30] to [3E], RX[40] to [4E], and RX[50] to [5E] in the memory map.
These values are always kept updated to the most recent state, so operations such as com-
mand setting are not needed.
For detailed information on external output and alarm functions, refer to the user’s manual of
the controller that you use.
<Reference>
Judgment output reading is updated automatically.
Remote output RX (SC-HG1-C → Master)
RX F E D C B A 9 8 7 6 5 4 3 2 1 0
Sensor
Function
Commu-
nication
unit
Slave
unit
14
Slave
unit
13
Slave
unit
12
Slave
unit
11
Slave
unit
10
Slave
unit
9
Slave
unit
8
Slave
unit
7
Slave
unit
6
Slave
unit
5
Slave
unit
4
Slave
unit
3
Slave
unit
2
Slave
unit
1
Master
unit
+20 OUT1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+30 OUT2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+40 OUT3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+50 Alarm 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Example: To check the external output signal and alarm func-
tion signal of slave unit 2, read RX[22], [32], [42], [52].
Example: To check the external output signal and alarm function
signal of the master unit, read RX[20], [30], [40], [50].
4-7 External input
Control of external input from the master unit cable and external input from the SC-HG1-C is by
OR operation.
Settings from the SC-HG1-C and input from
external input are by OR operation.
When either turns ON, the controller executes
ON operation.