Panasonic SC-HG1-C, User Manual, Page: 54 / 128

CC-LINK Network Communication
WUME-SCHG1C-4 4-20
■
Remote register RWw (Mode 2 master station → Communication unit)
This is a write-only register for output from the master station to the communication unit in units
of words (16 bits).
<Remote register RWw>
RWw F E D C B A 9 8 7 6 5 4 3 2 1 0
+00 Not used
Command request sensor
Slave
unit 14
Slave
unit 13
Slave
unit 12
Slave
unit 11
Slave
unit 10
Slave
unit 9
Slave
unit 8
Slave
unit 7
Slave
unit 6
Slave
unit 5
Slave
unit 4
Slave
unit 3
Slave
unit 2
Slave
unit 1
Master
unit
+01 Command code
+02
Command data
Master unit (32 bits)
+03
+04
Command data
Slave unit 1 (32 bits)
+05
+06
Command data
Slave unit 2 (32 bits)
+07
+08
Command data
Slave unit 3 (32 bits)
+09
+0A
Command data
Slave unit 4 (32 bits)
+0B
+0C
Command data
Slave unit 5 (32 bits)
+0D
+0E
Command data
Slave unit 6 (32 bits)
+0F
+10
Command data
Slave unit 7 (32 bits)
+11
+12
Command data
Slave unit 8 (32 bits)
+13
+14
Command data
Slave unit 9 (32 bits)
+15
+16
Command data
Slave unit 10 (32 bits)
+17
+18
Command data
Slave unit 11 (32 bits)
+19
+1A
Command data
Slave unit 12 (32 bits)
+1B
+1C
Command data
Slave unit 13 (32 bits)
+1D
+1E
Command data
Slave unit 14 (32 bits)
+1F
+20
Not used
~
+3F
<Setting details>
Name Device No. Description
Command request
sensor
RWw[00]
Specify the controller for sending a command.
The command is sent to the controller whose bit is set.
Command code RWw[01] Set the command code to be sent to the controller.
Command data RWw[02] to [1F] Set the controller set value according to the command to be sent.
1: If it is necessary to use the unused area, always set to “0”.