Rx450AC Rx550DC MK3 Installation Manual - V19 30Sep05.doc
Page 24/28
Receiver USER GUIDE
Select the camera to control using the Panasonic controller.
Manual control of the pan/tilt head and lens is accomplished by pressing the relevant key
or moving the joystick. Multiple functions can be controlled simultaneously. E.g. Pan Left
and Tilt Down.
To move the pan/tilt head to a preset position, refer to the Panasonic controller manual.
The receiver supports preset 1 – 64.
If this preset has been programmed, the head/lens will move to show the preset position.
Note: preset functions require a preset head for pan/tilt positioning and a preset lens for
zoom/focus positioning.
Receiver OSD displayed.
W
Wipe auxiliary output is active
*
Lights auxiliary output is active
Random Pan is running
Auxiliary functions are accessed using the AUTOPAN menu. This is displayed when the
AUTO key is pressed and appears as follows:
Pressing the AUTOPAN key displays this menu
Use the UP/DOWN keys to choose a line and LEFT or RIGHT
to either toggle ON/OFF or display ALARM MENU
ALARM MENU
Display ALARM menu to enable/disable alarm inputs
RANDOM PAN OFF
Start RANDOM
PATROL OFF
Start preset patrol
LIGHTS OFF
Toggle the LIGHTS auxilliary ON/OFF
WASH/WIPE OFF
Toggle WIPE & WASH auxilliary.WASH time set in OPTIONS
PROG PRESETS OFF
ON=Program presets, OFF=Normal
CANCEL
Quit menu
AUTOPAN
When RANDOM PAN is selected, the head starts a random panning sequence until either
a manual command or a local alarm occurs. If DISPLAY AUX OSD is set to DISP in the
OPTIONS 2 menu then an arrow is displayed showing the direction of pan travel.
PATROL: Starts the preset patrol. If DISPLAY PAT is set to YES the receiver displays P
and the current preset number. Pressing one of the pan/tilt keys will stop the patrol and
manual control is resumed.
