Rx450AC Rx550DC MK3 Installation Manual - V19 30Sep05.doc
Page 18/28
PROGRAMMING THE RECEIVER
An easy to use menu structure allows programming of the receiver's advanced features.
The menu can be accessed either local to the receiver using the three push buttons on
the receiver logic pcb or remotely using a Panasonic telemetry controller.
The three buttons on the receiver logic board allow navigation through the menu
structure. Pressing the
SELECT
button displays the
MAIN MENU
. Pressing the
UP
and
DOWN
buttons move the flashing highlight up or down. Pressing
SELECT
again allows the
selected sub menu to be displayed or a value to be changed. To exit the menu structure,
select
EXIT
from the
MAIN MENU
. The receiver will now reset and resume normal
operation.
The receiver menu can also be accessed remotely using the Panasonic controller by
using the procedure used to access a camera or dome setup menu. The exact operation
will vary depending upon the model of Panasonic controller used however for the FS616
multiplexer press and hold the SETUP/ESC key then tap the camera number
corresponding to the receiver. The UP and DOWN keys move the flashing highlight up
and down whilst the LEFT or RIGHT key is used as the select key. When the receiver
menu is accessed remotely, the RECEIVER menu does not display the EXIT line. To exit
from the receiver menu again use the key strokes that correspond to camera/dome menu
exit. With the FS616 press and hold the FUNCTION key and tap the SETUP/ESC key.
The receiver menu structure is shown on the following pages.
