VQT3C56
7
2
1
4
3
Blinking
The remaining battery level is displayed as
below while this unit is operating.
*
If the battery runs out, “
” blinks. Replace the
battery as soon as possible.
*
Please replace battery within approx. 3 minutes
for preservation of the clock data.
*
Depending on the battery status or the operation
content to use, even if the power turns off due to the
battery exhaustion, this unit may be used for a while if
turned on again. However, the unit may suddenly turns
off during operation due to the low level of battery.
*
Some level of battery is required when recording,
or performing Deleting files (
➜
page 14), Dividing
files (
➜
page 27), Deleting index (
➜
page 15),
FORMAT (
➜
page 34). If the battery indicator shows
“
” (blinking) and these operations are performed,
the power turns OFF due to the battery exhaustion.
*
Make sure to turn the power off before
removing the battery.
•
If the battery is removed while the unit is on,
data may be lost or this unit may be damaged.
Inserting the battery
1 AAA LR03 battery
(not supplied)
Make sure the battery face the right direction.
*
Use an alkaline battery.
*
Remove the battery from the unit if you will not
use it for a long period of time.
Preparation
Summary of Contents for RR-XR800
Page 58: ...VQT3C56 58 ONLY FOR AUSTRALIA ...
