VQT3C56
19
10
MP3 128k
A001
R
R
68:34:56
Level 10
PEAK
Recording level
Recording level
PEAK indication
Level metre
*
If the level metre swings and “
PEAK
” is displayed, this
means the recording level is too high. Adjust the level
within the range in which “
PEAK
” is not displayed even if
the recording sound reaches the highest level.
*
The input level (volume input to this unit) for
recording is combination of the recording level
and microphone sensitivity.
The input level image is as below.
Recording
level
MIC SENS.
LOW
HIGH
1
20 1
20
*
No sound is recorded at the recording level 0.
*
The recording level can also be adjusted during
recording or while recording is paused.
*
When
MENU
is pressed during recording standby, the
microphone sensitivity (
➜
page 17), “LOW CUT FILTER”
(
➜
page 17) and recording EQ (
➜
page 20) can be set.
Setting the recording peak limiter to ON
Even if the microphone ALC setting is OFF, when
the excessive volume is input, the recording level is
automatically adjusted and the sound distortion is
reduced.
• Press
STOP
to stop the unit.
1
Press
MENU
.
2
Press +, – to select “REC MENU”
and press
q
to enter.
3
Press +, – to select “PEAK LIMITER”
and press
q
to enter.
4
Press
u
,
i
to
select “ON” and press
q
to enter.
(The factory setting is “OFF”.)
10
OFF
ON
PEAK LIMITER
∗
OK ONLY WHEN
MIC ALC IS OFF
To exit the setting screen, press
MENU
.
*
When the microphone ALC setting is ON, the
recording peak limiter function will be activated
regardless of the above setting.
*
If the level metre swings, “
PEAK
” is displayed
regardless of the recording peak limiter setting.
Ad
vanced Operations
Summary of Contents for RR-XR800
Page 58: ...VQT3C56 58 ONLY FOR AUSTRALIA ...
