Panasonic RR-XR800, Operating Instructions Manual

Page: 26 / 60

VQT3C56
26
• Press
STOP
to stop the unit.
1
Press
MENU
.
2
Press +, – to select “PLAY MENU”
and press
q
to enter.
3
Press +, – to select “SOUND EQ”
and press
q to enter.
4
Press u , i to select
the sound EQ mode.
When you select modes other
than “USER”, go to step
5 .
FLAT
Setting when selecting “USER”:
⦑
After step
4
, press –.
150 Hz band is selected.
USER
⦒
Press
u
,
i
to select the frequency band to
change, and press +, – to adjust the volume level.
⦓
When the settings for the frequency band to
change are all complete, go to step 5 .
5
Press q to enter.
To exit the setting screen, press
MENU
.
The selected sound EQ mode is
displayed.
MP3
A
0:00:00
R
1/3
REC REMAINING TIME
68:12:34
FLAT 128k
EQ mode Effect and application
FLAT
The sound equalizer function is not used. You hear
the original sound without any change.
BASS Emphasise the bass range strongly.
CLEAR Emphasise the treble range strongly.
HEAVY Emphasise the bass and treble ranges slightly.
SOFT Emphasise the middle range.
VOICE Reduce noise to make human voice easily heard.
USER
This mode enables adjustment of frequency bands of
150 Hz, 500 Hz, 1 kHz, 4 kHz and 12 kHz.
(The factory setting is “FLAT”.)
Setting the playback EQ (SOUND EQ)
Using the sound EQ enables you to set bass, middle and treble range of volume level according to your
preferred settings for playback.
The sound EQ includes 6 types of fixed mode and the “USER” mode with which you can set the volume
level according to each frequency band.
The sound EQ is effective only when listening with the earphones.