Panasonic RR-XR800, Operating Instructions Manual

Page: 20 / 60

VQT3C56
20
Setting the recording EQ
• Set the microphone ALC setting to OFF beforehand. (
➜
page 18)
(When the microphone ALC setting is ON, the unit does not enter
the recording standby.)
1
Press and hold
REC
for 1 second or more.
The unit enters the recording standby.
2
Press
MENU
.
3
Press +, – to select “REC EQ” and press q to enter.
4
Press u , i to select
the recording EQ mode.
When you select modes other
than “USER”, go to step
5 .
10
FLAT
Setting when selecting “USER”:
⦑
After step
4
, press –.
150 Hz band is selected.
USER
10
⦒
Press u , i to select the frequency
band to change, and press +, – to adjust
the recording level.
⦓
When the settings for the frequency band to
change are all complete, go to step 5 .
5
Press q to enter.
To exit the setting screen, press
MENU
.
The EQ mode name is not displayed after exiting the setting screen.
Pressing
REC
starts recording.
EQ mode Effect and application
FLAT This (basic) mode does not emphasise a speci fi c sound range.
SUPER BASS Emphasise the bass range strongly.
BASS Emphasise the bass range slightly.
MIDDLE Emphasise the middle range.
BASS & TREBLE Emphasise the bass and treble ranges slightly.
TREBLE Emphasise the treble range slightly.
SUPER TREBLE Emphasise the treble range strongly.
USER
This mode enables adjustment of frequency bands
of 150 Hz, 500 Hz, 1 kHz, 4 kHz and 12 kHz.
(The factory setting is “FLAT”.)
* When the microphone ALC setting is ON or recordings
other than the microphone recording are performed,
the recording EQ does not function.
Using the recording EQ enables you to set bass, middle and treble range of recording level according to
your preferred settings for recording.
The recording EQ includes 7 types of fixed mode and the “USER” mode with which you can set the
recording level according to each frequency band.