Chapter 4
Settings — [PICTURE] menu
78 - ENGLISH
Terminal
System format
<R/P
R
/VIDEO> terminal, <G/
Y>/<B/P
B
/C> terminals
Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL],
[PAL-M], [PAL-N], [SECAM], or [PAL60].)
Switch the setting to the signal method for the TV used.
<RGB 1 IN> terminal, <RGB 2
IN> terminal
480i, 576i, or 576p signal
Select [RGB] or [YC
B
C
R
].
VGA60 or 480p signal
Select [VGA60], [480p YC
B
C
R
], or [480p RGB].
Other movie-based signals
Select [RGB] or [YP
B
P
R
].
<DVI-D IN> terminal
480i, 576i, 480p, or 576p
signal
Select [RGB] or [YC
B
C
R
].
Other movie-based signals
Select [RGB] or [YP
B
P
R
].
<HDMI IN> terminal, <DIGITAL
LINK/LAN> terminal
480i, 576i, 480p, or 576p
signal
Select [AUTO], [RGB], or [YC
B
C
R
].
Other movie-based signals
Select [AUTO], [RGB], or [YP
B
P
R
].
<SDI IN> terminal
(Only for PT-RZ670)
Select [AUTO], [480i YC
B
C
R
], [576i YC
B
C
R
], [720/50p YP
B
P
R
], [720/60p YP
B
P
R
], [1035/60i YP
B
P
R
],
[1080/24p YP
B
P
R
], [1080/24sF YP
B
P
R
], [1080/25p YP
B
P
R
], [1080/30p YP
B
P
R
], [1080/50i YP
B
P
R
],
[1080/60i YP
B
P
R
], [1080/50p YP
B
P
R
], [1080/60p YP
B
P
R
], [1080/24p RGB], [1080/24sF RGB],
[1080/25p RGB], [1080/30p RGB], [1080/50i RGB], or [1080/60i RGB].
4)
Press the <ENTER> button.
Note
f
Refer to “List of compatible signals” (
x
page 176) for the types of video signals that can be used with the projector.
f
This may not function properly for some connected external devices.
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f
Refer to [COLOR MATCHING] (
x
page 91).
2)
Display the [PICTURE] menu.
f
Refer to “[PICTURE] menu” (
x
page 72).
3) Press
as
to select [PICTURE MODE].
4) Press
qw
to set [NATURAL].
5)
Press
as
to select [COLOR].
6)
Press the <DEFAULT> button on the remote control to set the factory default setting.
7)
Follow Steps 5) - 6) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], [GAMMA], and [SYSTEM
DAYLIGHT VIEW] to the factory default settings.
Note
f
sRGB is available for RGB signal input only.
