Chapter 2
Getting Started — Setting up
ENGLISH - 31
Parts for ceiling mount (optional)
The projector can be installed on the ceiling by combining the optional Ceiling Mount Bracket (Model No.: ET-PKD120H (for high ceilings),
ET-PKD120S (for low ceilings), ET-PKD130H (for High Ceilings, 6-axis Adjustment)) and the Ceiling Mount Bracket (Model No.: ET-PKD130B
(Projector Mount Bracket)).
f
Be sure to use the ceiling mount bracket specified for this projector.
f
Refer to the Installation Instructions of the ceiling mount bracket when installing and setting up the projector.
Attention
f
To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualified
technician.
Projected image and throw distance
Refer to the projected image size and projection distance to install the projector. Image size and image position can be adjusted in accordance
with the screen size and screen position. When the fixed-focus lens (Model No.: ET-DLE030) is attached, the projection relation between the
screen and the projector differs from that of other lenses. Refer to “For fixed-focus lens (Model No.: ET-DLE030)” (
x
page 32) for details.
SD
L (LW/LT)
L1
L1
L (LW/LT)
SW
SH
H
SH
SW
Projected image
Screen
Screen
(Unit: m)
L (LW/LT)
*1
Projection distance
L1
Lens protrusion dimension
SH
Projected image height
SW
Projected image width
H
Distance from the lens center to the bottom edge of the projected image
SD
Projected image size
*1
LW: Minimum projection distance when the Zoom Lens is used
LT: Maximum projection distance when the Zoom Lens is used
(Unit: m)
Projection lens Model No.
Dimension for L1 (approximate value)
Standard zoom lens
0.043
ET-DLE055
0.027
ET-DLE085
0.084
ET-DLE150
0.044
ET-DLE250
0.045
ET-DLE350
0.051
ET-DLE450
0.095
