Chapter 4
Settings — [SECURITY] menu
ENGLISH - 97
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press
as
to select [CONTROL DEVICE SETUP].
2) Press the <ENTER> button.
f
The
[CONTROL DEVICE SETUP]
screen is displayed.
3) Press
as
to select [CONTROL PANEL] or [REMOTE CONTROL].
4) Press the <ENTER> button.
f
The
[CONTROL PANEL]
screen or the
[REMOTE CONTROL]
screen is displayed.
5) Press
as
to select [ENABLE] or [DISABLE].
f
You can set the operation restriction from the control panel or the remote control.
[ENABLE]
Enables all button operations on the projector body or the remote control.
[DISABLE]
Disables all button operations on the projector body or the remote control.
6) Press the <ENTER> button.
7) When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.
Note
f
When a button operation is performed on the device set to [DISABLE], the
[SECURITY PASSWORD]
screen is displayed.
To continue operations, enter the security password.
f
The
[SECURITY PASSWORD]
screen will disappear when the <MENU> button is pressed, or when there is no operation for approximately
ten seconds.
f
If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f
When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
