Panasonic PT-RW430UK Operating Instruction Download Page 19

Page: 19 / 138

Chapter 1

Preparation — Precautions for use

ENGLISH - 19

Accessories

Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of

accessories.

Wireless remote control unit <1>

(N2QAYB000812)

Power cord <1>

(TXFSX01RWDZ)

CD-ROM <1>

(TXFQB02VLF2)

AA/R6 or AA/LR6 battery <2>

(For remote control unit)

Attention

After unpacking the projector, discard the power cord cap and packaging material properly.

Do not use other power cords other than the supplied power cord.

For missing accessories, consult your dealer.

Store small parts in an appropriate manner, and keep them away from small children.

Note

The model numbers of accessories are subject to change without prior notice.

Contents of the supplied CD-ROM

The contents of the supplied CD-ROM are as follows.

Instruction/list (PDF)

Operating Instructions – Functional Manual
Multi Projector Monitoring & Control Software Operation Manual
Logo Transfer Software Operating Instructions
List of Compatible Projector

Models

This is a list of projectors that are compatible with the software

contained in the CD-ROM and their restrictions.

Software

Multi Projector Monitoring &

Control Software (Windows)

This software allows you to monitor and control multiple

projectors connected to the LAN.

Logo Transfer Software

(Windows)

This software allows you to create original images, such as

company logos to be displayed when projection starts, and

transfer them to the projector.

Optional accessories

(product name)

Model No.

Ceiling mount bracket

ET-PKR100H (for high ceilings), ET-PKR100S (for low ceilings), ET-PKR100P (for portrait)

Digital interface box

ET-YFB100G

Note

The model numbers of optional accessories are subject to change without prior notice.

Summary of Contents for PT-RW430UK











































































































































Search results

Summary of Contents for PT-RW430UK

Reviews:

Related manuals for PT-RW430UK

Brands by name

Popular brands

Panasonic PT-RW430UK, Operating Instruction

Search results

Summary of Contents for PT-RW430UK

Reviews:

Related manuals for PT-RW430UK

Brands by name

Popular brands