Chapter 6
Maintenance — Light source/temperature indicators
268 - ENGLISH
Temperature indicator <TEMP>
Indicator status
Status
Solution
Lighting red
f
Warm-up status
f
Wait five minutes when the power is turned on while the temperature is low
(approximately 0 °C (32 °F)).
f
Use the projector in an appropriate operating environment temperature
*1
.
f
Internal temperature is high
(warning).
f
Remove any objects if they are blocking the intake/exhaust vents.
f
Use the projector in an appropriate operating environment temperature
*1
.
f
Do not install the projector at an altitude of 4 200 m (13 780') or higher
above sea level. (Altitude of 4 200 m (13 780') above sea level is the
maximum height that the performance of this projector is guaranteed.)
Blinking red
(2 times)
f
Internal temperature is high (standby
status).
Blinking red
(3 times)
f
The cooling fan has stopped.
f
Turn the <MAIN POWER> switch to <OFF>
page 79), and consult
your dealer.
*1
For the operating environment temperature of the projector, refer to “Operating environment” (
Note
f
If the temperature indicator <TEMP> is still lit or blinking after taking the measures, ask your dealer for repair.
