Chapter 4
Settings — [SETUP] menu
70 - ENGLISH
[VERTICAL FLIP]
Set the display method according to the conditions of use of the projector such as the installation condition and direction of projection.
Change the setting in such a case when the screen shows vertically flipped image.
1) Press
as
to select [VERTICAL FLIP].
2) Press
qw
to select an item.
f
The items will switch each time you press the button.
[OFF]
Select this item when projecting normal images.
[ON]
Select this item when projecting vertically flipped images.
[ASPECT]
(Only in the projector mode)
You can switch the aspect ratio of the image.
1) Press
as
to select [ASPECT].
2) Press
qw
or the <ENTER> button.
f
The
[ASPECT]
individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL]
Displays images without changing the aspect ratio of the input signals.
[FULL]
Displays images in the entire screen range. When the aspect ratio of the input signal differs from that
of the screen range, the images are displayed with the input signal converted to the aspect ratio of
the screen.
Note
f
If an aspect ratio which is different from the aspect ratio for the input signals is selected, the images will appear differently from the originals.
Be careful of this when selecting the aspect ratio.
f
If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that
adjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the original
copyright owner for that program under copyright protection laws. Be aware when you use the aspect ratio adjustment function of the
projector.
f
[FULL] may not be allowed to select for some signals.
f
The setting of [ASPECT] is not reflected in internal test patterns (
x
page 92).
[KEYSTONE]
Correct keystone distortion that occurs when the projector main unit (projection lens surface) does not directly face the projection surface.
Setting [HV CORRECTION]
1) Press
as
to select [KEYSTONE].
2) Press the <ENTER> button.
3) Press
as
to select [HV CORRECTION].
4) Press the <ENTER> button.
f
The
[HV CORRECTION]
individual adjustment screen is displayed.
5) Press
asqw
to adjust.
[HV CORRECTION]
[VERTICAL]
[HORIZONTAL]
