Chapter 5
Operations — Network connection
104 - ENGLISH
Note
f
Wireless LAN and wired LAN cannot be used in the same segment.
f
If multiple devices are to be connected, set IP addresses that do not overlap.
f
Enter SSID correctly in single-byte alphanumeric characters.
f
“any” or “ANY” cannot be set for SSID.
f
This setting is not necessary when connecting Miracast. Refer to “Miracast function” (
x
page 126) for Miracast.
f
The following settings are configured as the factory defaults.
[M-DIRECT]
[IP ADDRESS]
192.168.12.100
[SUBNET MASK]
255.255.255.0
[SSID]
M-DIRECTxxxx (xxxx stands for the last four-digit number of the
network ID.)
[CHANNEL]
1
[KEY]
The same character string as SSID
[USER1]/[USER2]/[USER3]
[SSID]
Panasonic Projector
[DHCP]
OFF
[IP ADDRESS]
192.168.11.100
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.11.1
[AUTHENTICATION]
Open
[ENCRYPTION]
None
[DNS1]/[DNS2]
None
Setting for computer
1) Turn on the computer.
2) Configure network settings following the instructions of your network administrator.
f
If [M-DIRECT] is set on the projector side, set “Obtain an IP address automatically” in the network setting on the computer side.
f
If [USER1] through [USER3] are set on the projector side, follow the instructions of your network administrator and configure each
network setting item of your computer and the projector.
3) Connect the computer to the network set for the projector.
f
For Windows computers, click
in the task tray (lower right of the computer screen). If [M-DIRECT] is set on the projector, select
the same name as SSID set for the projector. If [USER1] through [USER3] are set on the projector, select the same name as SSID of
your access point.
For Mac, click
in the menu bar (upper right of the computer screen). If [M-DIRECT] is set on the projector, select the same name
as SSID set for the projector. If [USER1] through [USER3] are set on the projector, select the same name as SSID of your access
point.
f
If the projector is in the default settings and [M-DIRECT] is set, [SSID] is [M-DIRECTxxxx] (xxxx stands for the last four-digit number of
the network ID).
Note
f
If you use wireless LAN connection utility that is standard for your OS, follow the operation procedure of the utility you use to connect to the
network.
