Panasonic PT-JW130HBU Operating Instructions Manual Download Page 178

Page: 178 / 218

Chapter 5

Operations — Content Manager

178 - ENGLISH

[Power]

[Enable]

Signage playback (schedule) resumes when power off/on registered

in the schedule is performed, or the power <

> button on the

remote control or power supply control by a command is performed,

and then the input switches to signage.

[Disable]

Signage playback does not resume even when power off/on

registered in the schedule is performed, or the power <

> button

on the remote control or power control by a command is performed.

[Image content]

[Enable]

Signage playback (schedule) resumes at the playback start time of

the image content (still image/movie/external input display content/

playlist in the SD card) set in the schedule, and then the input

switches to signage.

[Disable]

Signage playback does not resume even at the start time of the

image content (still image/movie/external input display content/

playlist in the SD card) set in the schedule.

When you set [Restart option] in the [System setting] page, the setting is reflected in the menu setting of the projector. Refer to “Setting the

restart option” (

page 72) which explains the [SETUP] menu

→

[SIGNAGE].

Obtaining a backup of a schedule

Download a registered schedule into the client computer (only Windows computer/Mac are supported).

[Data management] page

5
4

1 [Backup] - [All schedule]

Sets the backup target to be all schedules.

Select this radio button to include all the registered schedules in

backup targets.

2 [Backup] - [Schedule(Week)]

Sets the backup target to be the schedule of day of the week.

When this radio button is selected, is enabled and a

registered day of the week schedule can be selected.

3 [Backup] - [Schedule(Date)]

Sets the backup target to be the schedule of the specified date.

When this radio button is selected, is enabled and a

registered schedule can be selected by specifying the date.

4 [Backup] button

Click this to save the selected backup target data into the client

computer.

5 [Undo] button

Click this to undo the backup target setting to the state before

displaying the [Data management] page.

[Backup file list] screen

Summary of Contents for PT-JW130HBU



























































































































































































































Search results

Summary of Contents for PT-JW130HBU

Reviews:

Panasonic PT-JW130HBU, Operating Instructions Manual, Page: 178 / 218

Search results

Summary of Contents for PT-JW130HBU

Reviews: