manualshive.com logo in svg

Panasonic PT-JW130HBU, Operating Instructions Manual

Share
Download
Panasonic PT-JW130HBU Operating Instructions Manual Download Page 34

Chapter 2

 

Getting Started — Installing/removing the projector

34 - ENGLISH

5)  Attach the supplied connector secure lock.

 

f

Attach the connector secure lock from under the <AC IN> terminal on the power supply unit along the guides on both sides.
Confirm that the power connector of the adapter is placed inside the ribs of the connector secure lock (the power supply unit side) as 

shown in the figure.

Ribs

Guide

Guide

Connector secure lock

Connector secure lock

Power connector

6)  Put the string of the adapter cover on the connector secure lock.

 

f

Put the string already attached to the supplied adapter cover on the connector secure lock as shown in the figure.

Adapter cover

String

7)  Fix the connector secure lock.

 

f

Push the connector secure lock in until the tab of the connector secure lock clicks with the string put on.
Be careful not to get the string caught in the tab.

 

f

The string is used to prevent the adapter cover from falling off. Be sure to use the projector with the string put on the connector secure 

lock.

Tab

String

Summary of Contents for PT-JW130HBU



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands