Chapter 7
Appendix — Specifications
ENGLISH - 213
Specifications
The specifications of the projector are as follows.
Model No.
PT-JW130HBU/PT-JW130HWU
Power supply
120 V
~
(120 V alternating current), 50 Hz/60 Hz
Power consumption
125 W (1.2 A)
In standby mode (when [STANDBY MODE] is set to [ECO]): 0.3 W
*1
In standby mode (when [STANDBY MODE] is set to [NETWORK]): 6 W
*2
In standby mode (when [STANDBY MODE] is set to [NORMAL]): 11 W
DLP chip
Size
11.4 mm (0.45") (aspect ratio 16:10)
Display system
1-unit DLP chip, DLP type
Number of pixels
1 039 680 pixels (WXGA comparable)
Lens
Electric zoom
1.5 to 3.3:1
Electric focus
F = 2.0 to 2.7
f = 15.2 mm to 32.7 mm
Light source
Laser diode
Light output
*3
1 000 lm (ANSI)
Contrast ratio
*3
1 000:1
Projected image size
0.76 m (30") to 5.08 m (200")
Screen aspect ratio
16:10
Projection method
[FRONT]/[REAR]
(On/off of vertical flip can be set with [VERTICAL FLIP])
Card slot
SD card slot
*4
x 1 (supports SDHC memory card)
Outer case
Molded plastic
Outer color
PT-JW130HBU: Black, PT-JW130HWU: White
Weight
3.2 k
]
(7.1 lbs.)
Noise level
*3
36 dB when [LIGHT POWER] is set to [NORMAL]
30 dB when [LIGHT POWER] is set to [ECO]
Operating
environment
Temperature
*5
0 °C (32 °F) to 40 °C (104 °F)
Humidity
10 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03 or AAA/LR03 battery x 2)
Operating range
Within approx. 7 m (22'11") (when operated directly in front of signal receiver)
Weight
63
]
(2.2 ozs.) (including batteries)
Dimensions
Width: 44 mm (1-23/32"), Height: 105 mm (4-1/8"), Depth: 20.5 mm (13/16")
*1 When the [SETUP] menu
→
[ECO MANAGEMENT]
→
[STANDBY MODE] is set to [ECO], the network function (both wireless LAN and wired LAN)
cannot be used in standby mode.
*2 When the [SETUP] menu
→
[ECO MANAGEMENT]
→
[STANDBY MODE] is set to [NETWORK], the network function while in standby mode is
restricted to the projector operations via wired LAN using the Wake on LAN function.
*3 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*4 Operations of the Panasonic SD memory card up to capacity of 2 GB and Panasonic SDHC memory card up to capacity of 32 GB are confirmed.
*5 The operating environment temperature should be between 0 °C (32 °F) and 35 °C (95 °F) when using the projector at elevations between 1 000 m
(3 281') and 2 700 m (8 858') above sea level.
When using the projector at elevations lower than 1 000 m (3 281') above sea level, and the operating environment temperature becomes 35 °C
(95 °F) or higher, the light output may be reduced to protect the projector. When using the projector at elevations between 1 000 m (3 281') and
2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to
protect the projector.
