Panasonic PT-JW130HBU Operating Instructions Manual Download Page 39

Page: 39 / 218

Chapter 2

Getting Started — Installing/removing the projector

ENGLISH - 39

2) Adjust the orientation of the main unit.

Adjust the ball joint movable part to the direction to tilt the main unit, and adjust the orientation of the main unit.

360°

Ball joint fixing

screws

Shaft holder

Ball joint movable part

The shaft holder will rotate 360° when the rotating

fixing screw is loosened.

Move the ball joint movable part to the direction to

tilt the main unit.

The ball joint will become free when the ball joint fixing screws (2

locations) are loosened.

The main unit can be rotated 360° or the main unit can be tilted 90° at

the ball joint movable part.

Ball joint movable range:

Approximately 90°

Main unit

Rotating fixing

screw

3) Tighten the fixing screws.

While supporting the main unit, securely tighten the rotating fixing screw and ball joint fixing screws (2 locations) using the supplied

7/64" Allen wrench.

Attention

The main unit and the power supply unit are connected with cables, etc. Do not rotate or tilt the main unit more than necessary.

Note

After adjusted roughly, fine adjust the projection position while projecting.

The rotating fixing screw and the ball joint fixing screws are hexagonal socket head fixing screws (M6). Note that they will come off the

projector if they are loosened too much.

Removing the projector from the track system

1) Turn off the power of the track system.

WARNING

When removing the projector from the track system, be sure to turn off the power of the track system.

Electric shocks can result.

Summary of Contents for PT-JW130HBU



























































































































































































































Search results

Summary of Contents for PT-JW130HBU

Reviews:

Brands by name

Popular brands

Panasonic PT-JW130HBU, Operating Instructions Manual

Search results

Summary of Contents for PT-JW130HBU

Reviews:

Brands by name

Popular brands