manualshive.com logo in svg

Panasonic PT-JW130HBU, Operating Instructions Manual, Page: 131 / 218

Share
Download
Panasonic PT-JW130HBU Operating Instructions Manual Download Page 131

Chapter 5

 

Operations — Content Manager

ENGLISH - 131

http://panasonic.net/avc/projector/

 

f

Screen illustration of the computer

Descriptions in this manual assume “Windows 8” as the OS and “Internet Explorer 10” as the web browser. Depending on the type of the 

OS, web browser, or computer you use, the screen size or display may differ from the ones shown in this manual. In addition, the “file 

selection screen” in the following operation procedures uses the OS standard functions.

Logging out from the Content Manager

Terminate signage setting (schedule/slideshow) and log out from the Content Manager.

1)  Click the [Logout] button on the top right of the screen.

 

f

Logout from the Content Manager is complete, and the login screen is displayed.

2)  Click the close button of the web browser to exit.

 

f

To use the Content Manager again, access the projector from the web browser. (“Logging in to the Content Manager” (

x

 page 129))

Note

 

f

Other than the start screen, you can also log out on the [Schedule] screen or the [Slideshow] screen.

[Schedule]

Register, edit, or play schedules for playing still image/movie/music files inside an SD card, turning the power off/on, and changing the 

brightness of the light source.

Note

 

f

Signage playback (schedule) operates based on the local date and time of the projector.

Summary of Contents for PT-JW130HBU



























































































































































































































Reviews:

No comments