Panasonic PT-DZ16K, Operating Instructions Manual

Page: 105 / 176

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 105
3) Press
as
to select [(IN) BAUDRATE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[9600]
Select the proper speed. [19200]
[38400]
5) Press
as
to select [(IN) PARITY].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NONE]
Select the parity condition. [EVEN]
[ODD]
Setting the communication condition of the <SERIAL OUT> terminal
1) Press
as
to select [RS‑232C].
2) Press the <ENTER> button.
f
The [RS‑232C] screen is displayed.
3) Press
as
to select [(OUT) BAUDRATE].
4) Press
qw
to switch the item.
[9600]
Select the proper speed. [19200]
[38400]
5) Press
as
to select [(OUT) PARITY].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NONE]
Select the parity condition. [EVEN]
[ODD]
Setting the response
1) Press
as
to select [RS‑232C].
2) Press the <ENTER> button.
f
The [RS‑232C] screen is displayed.
3) Press
as
to select [RESPONSE(ID ALL)].
4) Press
qw
to switch the item.
[ON]
Returns the response when the ID setting is ALL.
[OFF] Does not return the response when the ID setting is ALL.
5) Press
as
to select [GROUP].
6) Press
qw
to switch the item.
[A] - [Z]
Controls multiple projectors simultaneously by sending the ID of RS-232C. You can set groups from
[A] to [Z]. The projector responds when the ID of RS-232C matches the setting.
7) Press
as
to select [RESPONSE(ID GROUP)].