6
General information and safety instructions
1 General information and safety instructions
1.1 Introduction
This document contains the installation instructions for the Panasonic AHU Kits.
The following products are covered in this documentation:
● PAW-160MAH2 / PAW-160MAH2L
● PAW-280MAH2 / PAW-280MAH2L
● PAW-560MAH2 / PAW-560MAH2L
● PAW-280PAH2 / PAW-280PAH2L
AHU Kits connect Panasonic ECOi, ECO G and PACi outdoor units to third-party air handling
unit systems, using the same refrigerant circuit as the VRF system.
Application examples for Panasonic AHU Kits are hotels, offices, server rooms or all large build-
ings where air quality control such as humidity control and fresh air is needed.
The installation should be performed only by qualified electricians in strict accordance with the
installation instructions and especially with the safety instructions given in this document.
Where information in this document does not apply to all three VRF system ranges, but only to
either ECOi, ECO G or PACi systems, this will be indicated by the relevant product range logos:
Important: Validity of this document
Due to the ongoing development and innovation of Panasonic products, this document and all
the information contained herein is preliminary (as at December 2014). It may not reflect the
current status of the relevant products. Preliminary or missing information will be updated and
added on an ongoing basis and published at the discretion of Panasonic.
i
