![background image](http://html.mh-extra.com/html/panasonic/panafax-uf-7000/panafax-uf-7000_service-manual_257254158.webp)
158
UF-7000/8000
APR 2007
Ver. 2.1
UF-7100/8100
5.2.
Service Modes (For Facsimile)
Caution:
The factory default parameters are preset (country dependent) for optimum performance and in
compliance with the local telecommunication regulations/standards, and do not need to be changed.
Changing some of these parameters may cause the unit to be no longer compliant or become
inoperable.
5.2.1.
Fax Service Mode Procedure
1. To enter the Fax Service Mode
a. Press “
FUNCTION
” and then “
7
” keys.
b. Press “
MONITOR
” four times, then press “
* (TONE)
”.
c. Enter the desired code number or press the “V”, ”/\” arrow keys.
2. To exit the Fax Service Mode
Press “
STOP
” key.
Note:
The following buttons provide these functions in the Service Mode:
5.2.2.
FAX Service Mode Table
The following service modes are provided to assist you in setting operational functions of the unit and
determining the condition of the unit.
"START":
: The new setting value is stored in the machine.
"V”
: Scroll the function parameter number down.
"/\ “
: Scroll the function parameter number up.
No.
Service Mode
Description
00
Not Used
01
Function Parameter Setting
Allows changes to the function parameters (the home
position, etc.).
02
RAM Edit Mode
Factory use only.
03
Print Parameter List / Report
Prints the Function Parameter List, Page Memory Test, Printer
Report, All Document File, Protocol Trace and Toner Order
Form.
04
Modem Tests
Generates various binary, tonal and DTMF signals, by the
modem.
05
Not Used
06
RAM Initialize
Initialize RAM and restore the default value of the function
parameters.
Note:
Turn the Power Switch to the
OFF
and back to the
ON
position to enable the parameter settings.
07
Not Used
08
Check & Call
Allows input of information for Service Alert Report,
Maintenance Alert Report and Toner Order Form.
09
System Maintenance
Used for Firmware Update, Firmware Backup, Parameter
Restore, Parameter Backup, Transferring Firmware from the
PC to the Flash Card and Sending a Received File during a
fatal printer error.
10
Firmware Version
Displays Firmware Version for SC, SC Boot, Panel, etc.
Summary of Contents for Panafax UF-7000
