manualshive.com logo in svg

Panasonic Panafax UF-7000, Service Manual

Share
Download
Panasonic Panafax UF-7000 Service Manual Download Page 80

80

UF-7000/8000

APR 2007

Ver. 2.1

UF-7100/8100

12. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys sequentially to return to standby.
13. Turn the Power Switch on the back of the machine to the OFF position.
14. Reconnect the Telephone Line, LAN and/or USB Cables.
15. Turn the Power Switch on the back of the machine to the ON position.

Note:

Repeat steps 6 to 10 to continue formatting other SD Card(s).

3.5.7.

Firmware Emergency Recovery

The easiest method to recover the firmware in an Emergency Recovery routine is to use the Master SD 
Memory Card method (1 SD Memory Card required if the SD Memory Card capacity is Large enough 
size for all necessary Firmware).

If the Master SD Memory Card includes all necessary firmware as a package, all necessary firmware can 
be recovered once which including PCL option configurations, except the 2nd G3 Fax option.

After recovering, if optional 2nd G3 firmware is required, use the Network Firmware Update Tool, the 
Local Firmware Update Tool or use the Master SD Memory Card to update the firmware selecting the 
“Auto Mode” to the required level.

If the unit does not boot up properly, follow the steps below:

1. Turn the power OFF.

Before proceeding to the next step, you must create the Master SD Memory Card (read the 
appropriate sections first 3.5.5).

2. Turn the power On while holding the [ENERGY SAVER] button.
3. When the green lamp on the front panel turns On, release the [ENERGY SAVER] button.

The unit is now ready to accept the firmware code from Master SD Memory Card.
If there is additional 2nd G3 firmware code file to be updated, use the Master SD Memory Card to update 
the firmware using the “Auto Mode” again.

3.5.8.

Firmware Version

SC

:

UF-8000 or 7000

A A Vxxxxx

AU

Destination Code (Fax)
 AU : USA/Canada
 EB : UK etc.

Firmware Version (V1xxxx)
Language Code
  A : A-English, C-French & Spanish

Firmware Type
 A : Standard
 B, C : Optional

Model Number

etc.

(a)

Division Soft 
(When it is divided into (a) and (b))

UF-8100 or 7100

Summary of Contents for Panafax UF-7000























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands