![background image](http://html.mh-extra.com/html/panasonic/panafax-uf-7000/panafax-uf-7000_service-manual_257254371.webp)
35
Englis
h
456
• Machine received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing, the machine received a document.
• Machine was requested to relay a document.
1. Print a File List and check the contents.
2. Wait until machine finishes printing.
--
492/493/
494
Communication error occurred while receiving.
Check with the other party.
--
495
Telephone line disconnected.
Check with the other party.
--
501/502/
503/504
Communication error occurred using the internal V.34
Modem.
Check with the other party.
--
540/541/
542/
543/544
Communication error occurred while transmitting.
1. Reload the document and send again.
2. Check with the other party.
--
550
Telephone line disconnected.
Check with the other party.
--
552/553/
554/555
Communication error occurred while receiving.
Check with the other party.
--
580
Sub-address transmission to a machine that has no
Sub-address function.
Check the remote station.
--
581
Sub-address Password transmission to a machine
that has no Password Sub-address function.
Check the remote station.
--
623
No document loaded on the ADF.
Reload the document and send again.
--
630
Redial was not successful due to a busy line.
Reload the document and send again.
--
631
During dialing, STOP was pressed.
Reload the document and send again.
--
634
Redial was not successful due to no response from
the called station or wrong number dialed.
Note
: If busy tone was not detected, the machine will
only redial once.
Check the telephone number and send again.
--
638
Power failure occurred during the communication.
Check the power cord and plug.
--
718
Page Memory Overflow occurred while receiving
printing data. The paper size selected within your
application to print is larger than the paper size loaded
in the Paper Tray(s).
Check the document size and resolution.
Ask sender to resend in a supported size and
resolution.
--
730
Cannot retrieve the Journal nor program the Internet
Parameters and the Auto Dialer remotely via email
from a PC.
Check that the Fax Parameter No. 158 (
PC
Remote Update
) is set to “
Valid
”.
--
731
The dialer buffer for manual dialing was full (50
stations) when the Relay Transmission Request was
received.
Request the sender to resend the Relay
Transmission Request after the reserved
communication is finished.
--
800/814/
816/825
Machine was requested to relay a document or
Confidential Communication but has no capability.
Check with the other party.
--
Info.
Code
Meaning
Possible Action
Page
Continued on the next page...
Summary of Contents for Panafax UF-7000
