Panasonic Panafax UF-4000 Service Manual Download Page 30

Page: 30 / 284

2.2.4.

SC Plate, Speaker, SC PC Board, Base Plate Assembly, ACI PC Board,
Power Supply Unit

(1) 5

Screws

(19).

(2) Remove the

SC Plate

(603).

(3) Disconnect the

SPK Harness

(1005) on the SC

PC Board (CN2).

(4) Remove the

Speaker Bracket

(611).

(5) Remove the

Speaker

(612).

(6) Disconnect all

Connectors

on the SC PC Board.

Note:

CN 4 and 6 (Orange) cannot be removed
(soldered).
Remove CN103 (White) from the Power
Supply Unit.

(7) 6

Screws

(19) and 2

Screws

on Centronics I/F

Connector.

(8) Remove the

SC PC Board

(701).

Note:

When re-installing the SC PC Board, be
careful of the position of the Sensor

(9) 4

Screws

(19).

(10) Remove the

Base Plate Assembly

(602).

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(7)

(6)

(9)

(10)

(9)

Summary of Contents for Panafax UF-4000





























































































































































































































































































Search results

Summary of Contents for Panafax UF-4000

Reviews:

Related manuals for Panafax UF-4000

Brands by name

Popular brands

Panasonic Panafax UF-4000, Service Manual

Search results

Summary of Contents for Panafax UF-4000

Reviews:

Related manuals for Panafax UF-4000

Brands by name

Popular brands