Panasonic Panafax UF-4000, Service Manual

Page: 159 / 284

159
5.1.7. Service Mode 7 (LBP Service Mode)
This Service Mode is used to change printer parameters and verify printer information.
Use the following procedure to change printer parameter.
Service Mode 7
Step Operation or Unit Condition LCD Display
1 Standby
2 Press “FUNCTION” and then “7”.
3 Press “MONITOR” four times, then press “*”.
4 Press “7”.
5 1) Press "START" for printer parameter settings.
2) Press "2" and "START" to get the printer information.
Ex: Enter "START" for printer parameter settings.
6 Press "3" and “START”.
Then enter the number of pages.
Ex: Enter "50" and press "START".
7 Press "STOP" twice to return to standby.
Sub-Code Parameter Name Description
1 SET LBP PARAM.
1 PRINTER COUNTER Displays and resets the Printer and
Paper Tray counters.
2 LBP FUSER RESET Clears the LBP Fuser Error.
3 OUT OF TONER Sets the number of pages to print after
low toner is detected.
2 DISP. LBP INFO.
\/ /\ PRINT AVAILABLE
Shows the remaining number of
allowable printable pages after low toner
has been detected (Counter Only).
\/ /\ LBP MEM. CAPACITY Shows the Page Memory Capacity.
MMM-DD 10:58 00%
SET MODE (1-8)
SERVICE MODE
SET LBP PARAM.
PRINTER COUNTER
OUT OF TONER
MMM-DD 10:58 00%