Panasonic Palmcorder PV-DV202 Operating Instructions Manual Download Page 88

Page: 88 / 120

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

The person calling (inviting) side

Click [Start NetMeeting] in the “xxx-
conversation” screen.

The invited person side

The Instant Message screen appears
and a confirmation message is
displayed. Click on [Accept].

The NetMeeting screen is
automatically opened.

The first time Windows NetMeeting is
run, etc., the Setup screen is
displayed. Please carefully read the
contents and then proceed.
The user information, etc. is input.
Following the directions, please
complete the settings.

Click on [Options] in the [Tools] menu
to confirm Video Camera Properties.
• If Video is not recognized in Video

Camera Properties, select Control
Panel, System, Device Manager, and
finally Image Device for confirmation.

The invited person side

A message asking if the person
accepts or declines is displayed.
Click [Accept] on the screen.
• To ignore the invitation, click

[Decline].

The person calling (inviting) side

“Incoming-Call” screen is displayed.
Click on [Accept].

The invited person side
The person calling (inviting) side

The real-time live picture displayed in
the video camera is displayed on both
yours and the other person’s window
screen.

• If the picture is not displayed, click

several times on the screen.

• For other information about MSN

Messenger Service and Windows
NetMeeting, please refer to Help.

When access is finished, close MSN
Messenger Service and Windows
NetMeeting, then set Palmcorder
POWER to OFF.
Finally, disconnect the USB Cable.

Note

Web Camera (For Windows 98SE/Me/2000 users)

Note

PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402

Summary of Contents for Palmcorder PV-DV202

























































































































Search results

Summary of Contents for Palmcorder PV-DV202

Reviews:

Related manuals for Palmcorder PV-DV202

Brands by name

Popular brands

Panasonic Palmcorder PV-DV202, Operating Instructions Manual

Search results

Summary of Contents for Palmcorder PV-DV202

Reviews:

Related manuals for Palmcorder PV-DV202

Brands by name

Popular brands