Panasonic Palmcorder PV-DV202 Operating Instructions Manual Download Page 8

Page: 8 / 120

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Loosen the strap from the Buckle and
create a loop.

Pull the strap firmly through the
Buckle to shorten or lengthen the
strap.

Adjust the Length

Adjust the length of the Hand Strap to the
size of your hand as illustrated.

Attaching the Lens Cap Cord to the Hand
Strap:
Remove the Hand Strap from the front
clasp and thread the Strap through the loop
in the Lens Cap Cord.
Reattach the Hand Strap.

Lens Cap

Attaching the Shoulder Strap

Attaching the Lens Cap Strap:
Thread the Lens Cap Strap through the
Strap Attachment Ring as shown.

Hand Strap

Hand Strap

Undo the two strap ends from their
buckles.

Thread the strap ends through the
Strap Attachment Rings.

Reinsert the strap ends through their
buckles.
• Make sure the straps are not twisted.

Before Using

PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402

Summary of Contents for Palmcorder PV-DV202

























































































































Search results

Summary of Contents for Palmcorder PV-DV202

Reviews:

Related manuals for Palmcorder PV-DV202

Brands by name

Popular brands

Panasonic Palmcorder PV-DV202, Operating Instructions Manual

Search results

Summary of Contents for Palmcorder PV-DV202

Reviews:

Related manuals for Palmcorder PV-DV202

Brands by name

Popular brands