Panasonic Palmcorder PV-DV202 Operating Instructions Manual Download Page 52

Page: 52 / 120

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Card Features

Do steps 1 and 2 on page 51.

Press (M-DEL) to display the
DELETE menu. Then, rotate and
press JOG KEY to select

ALL

• The screen below is displayed.
• To cancel delete, press (M-STOP)

or rotate and press JOG KEY to
select NO.

Rotate and press JOG KEY to select

YES

• “PLEASE WAIT” is displayed on the

screen, and then “NO PICTURE” is
displayed.

• Press (M-STOP) to return to the

Card PhotoShot REC Mode screen.
(p. 48)

You can delete all images from the Memory
Card easily with this operation.

Warning:

Once deleted, images cannot be restored.

M-DEL

M-STOP

• While deleting image, DO NOT turn off

the Digital Video Camcorder or unplug
the AC Adaptor (supplied) because this
will cause irreversible damage to the
memory, resulting in reduced image
storage capacity.

Before you begin

• Set POWER to OFF before inserting a

recorded Memory Card. (pp. 48, 49)

Delete All Image Pages

2, 3

JOG KEY

Warning

PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402

Summary of Contents for Palmcorder PV-DV202

























































































































Search results

Summary of Contents for Palmcorder PV-DV202

Reviews:

Related manuals for Palmcorder PV-DV202

Brands by name

Popular brands

Panasonic Palmcorder PV-DV202, Operating Instructions Manual

Search results

Summary of Contents for Palmcorder PV-DV202

Reviews:

Related manuals for Palmcorder PV-DV202

Brands by name

Popular brands