– 78 –
Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
*6 Illuminated by [SLOT SEL] execution
*7 Displayed at top right only during recording or in special recording mode
*8 For details, refer to the operating instructions of Upgrade Software Key (AG-SFU603G: UPLINK device control function (extra-cost option)).
*9 The [AWB C.TEMP] item on the setting menu is displayed when it is [ON]. It is not displayed when it is [OFF].
*10 The UPLINK connection information does not disappear even if the display is OFF.
Mode check display
Almost all information is displayed in mode check.
[STATUS] screen
1 to 6 below are displayed only when the mode check is activated.
T C 1 2 : 3 4 : 5 6 : 2 3
1 2
9 9 min
D I ON
B 9 0%
P 2
60
F
*
U L L
I - P AU S E
F L UO .
F B C
1 0 8 0 i
AVC-I100
P 3 .2K
L T . BOX
0 dB
ND 1
8 3
E X
% ND 1
S E P
1 2 0 1 2
C 9
2
S PO T
F 5 . 6
3 : 5 9 : 5 9
MF 6 0
0
Z 6
6 0 : 2 4 P N
DR S
. 4
1
2
= = = = = = = =
1/ 1 2 3
C
H
C
H
C AC
Z x 2
SD
1 1 9 min
A.REC
1 - C L I P
0
S L O T 1 : NO T S U P PORT E
S L O T 2 : NO
C ARD
MA I N : Y GE T
1 : B ACK L I GH T
2 : T E X T MEMO
R E T : R EC R E V I EW
A B B NG
AWB NG
D
D
L.L.
1
2
3
6
5
4
1 P2 card slot status display
Displays each of the status of P2 card slots 1 and 2.
[ACTIVE]
Card that can be played back/recorded (including card for recording target)
[ACCESSING]
Card currently being played back/recorded
[INFO READING]
The card is being recognized.
[FULL]
P2 card with no remaining recording space.
[PROTECTED]
Write-protected P2 card
[NOT SUPPORTED]
Card cannot be used or recognized.
[FORMAT ERROR]
P2 card not in specified format
[NO CARD]
No card is inserted.
No display
In the USB device mode
2
Assignment information display of <USER> buttons (<USER MAIN>/<USER1>/<USER2>) and the <RET> button on the lens
Displays the information of the functions assigned to the <USER> buttons (<USER MAIN>/<USER1>/<USER2>) or the <RET> button on the lens.
For details, refer to “Assigning functions to <USER> buttons” (page 59), “RET SW” (page 124).
3
Automatic white balance, automatic black balance abnormal display
Displays the status in the mode check when the automatic white balance and automatic black balance do not function correctly.
4
Battery type display
Displays the battery type currently selected for detection of the battery charge level.
5 One-clip recording mode status display (page 74)
The display position on the mode check screen is different from the normal screen.
6 SD memory card remaining space in proxy recording (option)
Displays the recording capacity when proxy recording is recorded to the SD memory card.
The capacity is displayed in min when it is less than 120 minutes; in h when it is more than 120 minutes; 99h when it is more than 99 hours.
[PROXY/NETWORK] screen
The proxy and network operation status can be checked on the [PROXY/NETWORK] status screen for the mode check displayed when the <DISP/
MODE CHK> switch is pushed towards the <CHK> side twice.
MEDIA
:P2&SD
MODE
:STD 2CH MP4
SUPER
:UPPER
PROXY BOARD ERROR
<PROXY>
NETWORK :LAN
ERROR
STREAM :ERROR
!PRE REC
<NETWORK>
2
3
4
5
6
7
1
