– 73 –
Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
12 Date and time display
PPPGG\\\\KKPPVV
0RQWK
-$1-DQXDU\)(%)HEUXDU\0$50DUFK$35
$SULO0$<0D\-81-XQH-8/-XO\$8*
$XJXVW6(36HSWHPEHU2&72FWREHU129
1RYHPEHU'(&'HFHPEHU
'D\
<HDU²
+RXU
0LQXWH
6HFRQG
13 Focus bar display
Displays the following at the bottom left of the viewfinder. The high-frequency component of the video is converted to a numerical value and
displayed.
White bar
Focus bar display
Green line
Peak display
14 Shooting/recording and playback frame rate display
In the native recording mode, the number of shooting frames and number of recording/playback frames are displayed.
Example) 60:24PN (variable frame rate 24PN recording (VFR) in 60P shooting)
By playback, this becomes 24P Over 60P at 2:3 pull-down to indicate that playback is 24/60x slow playback.
In Standard recording, only the shooting frame rate is displayed.
Example) 24PA (2:3:3:2 pull-down over60i recording at 24PA)
15 Audio level meter display
r
When the [HEADROOM] setting on the [AUDIO SETUP] screen is set to [
−
20dB]
C
H
1
-20dB
0dB
C
H
2
r
When the [HEADROOM] setting on the [AUDIO SETUP] screen is set to [
−
18dB]
C
H
1
-18dB
0dB
C
H
2
r
When a monaural channel is selected on the [AUD03:MONI] screen of SmartUI
The channel number that is not selected is not displayed.
The recording level of each channel is displayed with each level bar, and this indicates that the audio channels to be output to speaker, the
<PHONES> and <AUDIO OUT> terminals are monaural.
C
H
1
--
When audio channel 1 is selected
16 Audio recording not available display
In native variable frame rate recording, the [
] mark is displayed when audio is not recorded.
This is also displayed in interval recording and one-shot recording since audio is not recorded (mute recording).
17 Shutter speed display
Displays the shutter speed.
With synchro scan, the display is as set by the [SYNC SCAN TYPE] item on the setting menu [SCENE FILE] screen (hour (minute) display or shutter
open angle display).
18 Dynamic range stretcher (DRS) function display
Displayed when the dynamic range stretcher function is activated.
19 Iris display
Displays F value.
f
[NC] is displayed when a lens connector is not connected.
20 Auto iris control display
[SPOT]
Auto iris control for spotlight
[BACK]
Auto iris control for the backlight compensation.
This is displayed also when the lens iris is set manually, though no operation is performed.
