– 26 –
Chapter 2 Description of Parts — Menu operation section and thumbnail operation section
Menu operation section and thumbnail operation section
2
1
3
4
5
6
7
f
With the setting menu open, navigate through setting menu pages,
select items, and set values.
f
Turn the jog dial button downwards or upwards while the setting
menu is displayed to move the menu cursor downwards and
upwards, respectively. Press the jog dial button to fix the settings.
f
When the shutter switch is set to <ON> and synchro scan is
selected without the menu opened, the synchro scan speed can be
adjusted.
f
When the white balance setting is variable, the white balance
variable value in the jog dial button can be adjusted by pressing
the <USER MAIN>, <USER1>, and <USER2> buttons that were
assigned the [F.JOG CT] function.
2
f
Hold down this button to display the setting menu screen on the
viewfinder screen. Press the button again to return to the original
image.
f
Button operations are not accepted while thumbnails are displayed
or during recording.
3
Press the button to display the thumbnail screen on the viewfinder
screen and the monitor connected to the camera. Button operations
are disabled during recording and playback.
4
<EXIT>/<CANCEL> buttons (page 103)
Restore the display to the previous state while the thumbnail menu or
property screen is displayed.
Also, pressing this button with the <SHIFT> button held down makes
it function as a cancel button, which is convenient when batch-
canceling clip selections.
5 Cursor/<SET> button (page 103)
Operate the setting menu, menu bars and thumbnails.
The four triangular buttons are the cursor buttons, and the square
button in the center is the <SET> button.
6 <THUMBNAIL MENU> button (page 103)
Press this button with the thumbnail displayed to move to the
thumbnail operations, allowing clip deletion operation, etc.
@
@
NOTE
t
Use the cursor/<SET> button and the <EXIT>/<CANCEL>
buttons to select thumbnails or operate menus. (page 103)
7
Press this button with other buttons held down at the same time.
f
<SHIFT> button
+
cursor button (
`
/
{
)
This moves the pointer to the thumbnail of the clip at the start or the
end in the thumbnail screen.
f
<SHIFT> button
+
<SET> button
Select all clips from the previously selected clip up to the clip at the
pointer position.
f
<SHIFT> button
+
<EXIT>/<CANCEL> button
This works as the cancelation function. (page 26)
Operations with the <SHIFT> button held down are displayed at the
bottom of each button.
