– 104 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
a: <THUMBNAIL> button
b: <EXIT> button
c:
awsq
cursor buttons
r
<SET> button
d: <THUMBNAIL MENU> button
e: <SHIFT> button
Playing back clips
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder screen.
2
Use the cursor buttons to move the pointer over the desired
clip.
3
Press the <PLAY/PAUSE> button.
f
The clip under the pointer will be played back on the viewfinder
screen.
f
After playback of the clip under the pointer has ended, subsequent
clips are played back in order on the thumbnail screen, and when
playback of the last clip ends, view returns to the thumbnail screen.
@
@
NOTE
t
When playing back clips it is not necessary to select the clips
(blue frames around the thumbnails).
t
Clips with clip numbers displayed in red* cannot be played.
* The not playable clip indicator is displayed when [B/W] is selected with
the [EVF TYPE] item on the setting menu [DISPLAY SETUP] screen.
f
During playback of clips, press the <
%
/REW> button to start 4x
speed reverse playback, and the <FF/
)
> button to start 4x speed
fast playback. Press the <PLAY/PAUSE> button to return to normal
playback.
f
During playback of clips, press the <PLAY/PAUSE> button to pause
the playback.
During a pause, press the <
%
/REW> button to pause the
playback at the beginning of the clip. Press the <
%
/REW> button
again to pause the playback at the beginning of the previous clip.
During a pause, press the <FF/
)
> button to pause the playback
at the beginning of the next clip.
f
Pressing the <STOP> button during clip playback stops the
playback and returns the display to the thumbnail screen.
@
@
NOTE
t
When playback is stopped, the position of the pointer moves to the
clip that was being played back, regardless of where the playback
started.
t
Press the <PLAY/PAUSE> button again to start playback from the
beginning of the clip under the pointer. To continue to play back
from where previously stopped, turn the [PLAYBACK RESUME]
setting in “Setting the thumbnail display” (page 111) to [ON].
Switching the thumbnail display
The display can be switched so that only those clips matching the specified conditions are displayed on the thumbnail screen.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder screen.
2
Press the <THUMBNAIL MENU> button.
The thumbnail menu appears.
<THUMBNAIL MENU> button
3
Select [THUMBNAIL] from the thumbnail menu.
Switch the thumbnail display by selecting one of the items.
[ALL CLIP]
Displays all clips.
[SAME FORMAT CLIPS]
Displays clips of the current system format.
[SELECTED CLIPS]
Displays randomly selected clips. The
thumbnails appear in selected order.
[MARKED CLIPS]
Displays clips with shot marks attached.
[TEXT MEMO CLIPS]
Displays clips with text memo data.
[SLOT CLIPS]
Displays clips recorded in the P2 card
inserted in the specified slot.
When [SLOT CLIPS] is selected, [SLOT1] to
[SLOT2] are displayed as a sub-menu, select
the desired slot to display the clips.
[SETUP]
Refer to “Setting the thumbnail display”
(page 111) for information about this item.
[EXIT]
Closes the sub-menu.
Changing thumbnails
Replace thumbnails with images that include previously attached text memos while images are recorded or played back.
1
Add text memos to images to be changed.
For details on adding text memos, refer to “Text memo recording
function” (page 45).
2
Select the thumbnail menu
→
[THUMBNAIL]
→
[TEXT MEMO
CLIPS] to display thumbnails of the clips with text memos.
3
Place the pointer on the clip of the thumbnail to be changed
and press the <SET> button, and then move the pointer to
the text memo display on the lower row.
