Installation/Troubleshooting
42
Making holes on mortar or concrete wall
1.
Put flexible stand on the wall where you plan to install the camera and mark
the points where you are going to make holes.
2.
Make holes with an electric drill. Insert plastic plugs (customer-provided) into
the holes and push them inside the holes with the hammer.
Note
Mortar wall is easy to come off in drilling.
3.
Mount the flexible stand by using the screws (accessories).
Change the drill depending on the
concrete wall or the tiled wall.
Caulk around the holes
if necessary.
Plastic Plug
Hammer
