Installation/Troubleshooting
21
[For assistance, please call: 1-800-272-7033]
3.
Click [Automatic Setup (Internet Access)].
Note
In order for Internet access to be properly enabled, your routers UPnP
TM
feature should be enabled. Most router manufacturers disable this feature. See
http://panasonic.co.jp/pcc/products/en/netwkcam/
for more information.
4.
Enter the user name and password that were set, and click [OK].
5.
To enable Internet access, select [Enable]. Choose [Disable] if you wish to
restrict access to your local network.
•
Check if your router supports UPnP
TM
referring to the router’s manual. If
UPnP
TM
is not supported, the router has to be manually configured for port
forwarding. Refer to the router’s manual for instruction on how to do it.
•
If you use a router not supporting UPnP
TM
, click [Disable].
•
If you select [Disable], skip to step 9.
Sets up the camera to view on
the LAN.
Sets up the Internet access to
the camera.
Manually sets up the camera.
Disables IPsec. If disabled, the
button is displayed gray.
Displays the Setup page (see
page 37 of the Operating
Instructions on the Setup CD-
ROM).
