Panasonic Omnivision PV-C1321, Service Manual

Page: 72 / 247

Equipment :
Oscilloscope,
NTSC Video Pattern Generator
1. Supply the Rainbow Color Bar signal to Video Input Jack.
2. Select SUB BRIGHT in EVR adjustment mode. Then, after making
a note of the original value, adjust to the minimum (C0).
3. Connect the Oscilloscope to Pin 5 of P6001 on the TV/VCR Main
C.B.A. or TP49 on the CRT C.B.A.
4. Select SUB TINT in EVR adjustment mode and adjust so that level
A and B should be equal in amplitude.
Fig.E9-1
5. Select SUB COLOR in EVR adjustment mode and adjust so that
the level C is (1.40 V[p-p]±0.15 V[p-p]: For model with 13 inch CRT)
or (1.50 V[p-p]±0.15 V[p-p]: For model with 20 inch CRT).
Fig.E9-2
6. Select SUB BRIGHT in EVR adjustment mode and reset to the
original value.
72